Augusta F150
| Piece passage | Up to 150 mm |
| Independent Z axes | Up to 3 |
| Electrical power supply | Three-phase 380/400 50 HZ |
| Tool change | Up to 13 positions |
| Work area | X 2100 – Y 1720 – Z 150 mm |
| X 3300 – Y 2100 – Z 150 mm | |
| X 5740 – Y 2100 – Z 150 mm | |
| X 7350 – Y 2100 – Z 150 mm | |
| X 9770 – Y 2100 – Z 150 mm | |
| X 11380 – Y 2100 – Z 150 mm | |
| X 15400 – Y 2100 – Z 150 mm |
Leather
Rubber
Paper/
Cardboard
PVC
Polyurethane Foam
Alucobond
Teflon
PTFE
Polycarbonate
Wood
The supporting structure consists of a monolithic base in thick steel, well ribbed and especially rigid. The particular structure, with very broad base has been designed to ensure stability and precision in cutting phase during all working conditions.
Stability
The mobile gantry structure is made up of a solid single block which is anchored to the base and slides on racks and prismatic guides equipped with recirculating ball bearings of the highest quality.
Precision
The fast and accurate positioning of the mobile gantry structure (X axis) and operating units (Y-axis) is obtained with pinion and sloping toothed rack, which ensure the precise positioning of the operating unit along the Z axis.
Automatic lubrication
System for automatic lubrication of X, Y and Z axis totally managed by numerical control. This option eliminates completely the need for manual maintenance of handling components.
Precision
The sturdy Gantry structure, combined with perfect mechanical dynamics and with the double motorization along the X axis of the mobile gantry structure controlled by Brushless motors, allow to obtain the highest accuracy of positioning and very high speed of movement with maximum results in terms of quality and finish.
The catenary system integrated in the base permits the operator to enjoy the maximum efficiency of the machine.
The operating units are modular and can be combined.
AFT Unit
Unit with independent Z axis, fixed or swinging blade cut controlled and activated through NC with automatic tool change.
ISO 10 connection.
New AFL Unit
AFL is the new intelligent high productivity unit used for the sectioning of carton and composite materials. It has a new generation algorithmic system which automatically performs transversal, longitudinal, 45° (folding) cuts at very high speed and quality, without creating scrap and wasting material.
FP unit
Double roto-translating die-cutting unit (RPM 1700) equipped with controlled Z axis of positioning and with pneumatic launch during processing phase. The units have an internal section to remove the die-cutting scraps. The Pen, with manually removable cartridge, is collocated on the FP unit.
The unit can be equipped with a device for the positioning of shaped die-cutters. Manual die-cutter change.
Electro-spindle
Unit with independent Z axis and automatic tool change.
Max RPM 40.000.
3.6 kW HSK 25 connection.
Liquid-cooled system.
Blades for leather cutting
Blades for polystyrene foam cutting
BLADES FOR PAPER AND CARDBOARD CUTTING
Cutters
Applicazioni
Aeronautics
Furnishing
- Automotive
- Industrial gaskets
Naval sector
- Packaging
Leather and fabric
Polymeric materials
Automatic tool changeover
and presetting device
Automatic tool changeover up to 13 positions for tool changeover management of cutter and blades. Automatic presetting device for tool length management.
The worktop, which is highly flexible and configurable, has micro-perforated panels that ensure not only the maximum flatness during cutting phase but also the best blocking of the material. The worktop consists of 24 independent vacuum areas selected by CNC.
Mechanical marks
The retractable stops on the worktop allow the operator to perform a precise positioning of the material to be worked.
The SD Software Design is a completely modular software including several packages that can be implemented. It has been designed to make the use of machine easier and more intuitive.
Positioning laser
The laser enables the operator to position the sheet to be cut, simply and rapidly, without need of external geometric reference.
Print marks
A high resolution camera enables identification of references on the printed material and consequently adaptation of cutting program.
Video projection
It optimizes at best also small amounts of material, by projecting the shape to be cut on the machine worktop.
